Stovax – Studio Air Edge Inset – Studio Air 1, Studio Air 2
For a classic hole-in-the-wall look, Stovax Studio Air inset wood burning fires come with an Edge Kit as standard for a stylish and minimalist no-frame finish. This frameless aesthetic offers contemporary perfection and creates a truly breathtaking centrepiece.
You can further enhance the Edge with the choice of three decorative coloured trims available, including Black, Storm Grey and White.
Visit our Studio Air Wood Burning Fires page for further information on this high efficiency range.
Studio Air Inset Wood Burning Fires
Stovax Studio Air inset wood burning fires are available in two sizes, and each can be selected as a frameless Edge, or enhanced with a choice of contemporary framing options. Across all versions, the Studio Air can be selected with one of three decorative coloured trims, in Black, Storm Grey or White, and can be selected with an optional dedicated external air kit. Visit our Studio Air wood burning fires page for more information on this high efficiency range.
Full range of Studio Air Inset Wood Burning Fires…
Key Facts
| Brand | Stovax |
| Ecodesign Plus* | Yes |
| Suitable for Smoke Control Areas | Yes |
| Reversible door for left or right opening** | Yes |
| Hearth Mountable† | Yes |
| Optional Warm Air Ducting Kit† | Yes |
| High efficiency | 79.6% (Studio Air 1) / 78.5% (Studio Air 2) |
| Wood burning | Yes |
| Boost setting for lighting and re-fueling | Yes |
| Optional Dedicated External Air Kit | Yes |
| Convected and radiant heat | Yes |
| Single air control | Yes |
| Decorative Coloured Trims | Black, Storm Grey, White |
*Subject to official listing.
**When using optional reverse door hanging kit.
† Cassette models only
Information
| Fire Size | Nominal Heat Output & Range |
Max log lengths | Frame dimensions mm (w x h) Edge |
Energy Efficiency Class |
|---|---|---|---|---|
| Studio Air 1 | 5.0kW (1.7-7kW) | 300mm (12″) | 778 x 450mm* | A |
| Studio Air 2 | 8.2kW (2.8-11kW) | 400mm (16″) | 978 x 476mm* | A |
*Dimensions given are those overall visible upon installation. Once installed, Edge kits are flush with the finished wall surface.
“ The content of this website is intended for initial assistance only – for full details please contact the showroom or refer to the manufacturers website for each product – there you will find full technical details, the product fiche etc which gives all efficiencies, installation instructions, dimensions and so on. We are more than happy to provide these but do not have the facility on this website. If you let us know which fires you are interested in, we can provide full details by email. If you have any questions at all please let us know. Happy Browsing! In the showroom or by email we are quite happy to provide full technical advice about installation and suitability.”
Last updated 6 June 2025
