Earlswood III Multi-fuel

Manufactured from steel and cast iron to give strength and efficient heat transfer back into the room, the Earlswood III is DEFRA exempt enabling it to burn wood within smoke controlled zones. Being a multifuel stove, you can also burn a range of smokeless fuels on this stove. Being EcoDesign makes the Earlswood III one of the most environmentally friendly stoves available with low CO & particle emissions and high efficiency. Finished in a traditional matt black paint for easy maintenance.

Product Data

• Output Range 5kw nominal (2.5Kw min / 6.5Kw max)
• Efficiency 76.7% gross 84.3% net
• Hearth Requirement Superficial non combustible 12mm hearth required (see Bldg Regs) – below 100 degrees
• Weight 80
• Flue Diameter 125
• Smoke Exempt? Yes – approved by DEFRA for woodburning in smoke controlled areas
• Log Length 35cm
• SIA Eco Design Ready? YES
• EEI classification for ecolabelling 2018 A+

Dimensions

• Height 536mm
• Width 480mm
• Depth 310mm

The content of this website is intended for initial assistance only – for full details please contact the showroom or refer to the manufacturers website for each product – there you will find full technical details, the product fiche etc which gives all efficiencies, installation instructions, dimensions and so on. We are more than happy to provide these but do not have the facility on this website.  If you let us know which fires you are interested in, we can provide full details by email. If you have any questions at all please let us know.   Happy Browsing! In the showroom or by email we are quite happy to provide full technical advice about installation and suitability.