Stûv (30-in) – Available In 3 Sizes (B-R-P)

Discretely built in to the heart of your home.

Restrained in-setting with subtle curves: installed to your requirements, flame and warmth are as one with your interior. Thanks to its three-door system, the Stûv30 three-in-one offers three modes of use. This inset stove enables you to direct hot air as you require, with or without a fan.

The Stûv 30-in insert can be fitted with a telescopic riser up to the ceiling, which guides the hot air and enables hot air grilles to be avoided.

3-door system

Changing mode only takes a few seconds: all you have to do is pivot the drum of your Stûv 30 until the door you want is in front of the stove opening.

• The glass door gives a magnificent view of the flames, guaranteeing safety, eco-friendliness and savings, thanks to its excellent output.
• The solid door slows down the fire and optimises performance.
• Open fire mode means that you can make the most of the crackling flames, the smell of the wood… and even have a barbeque!

Solid door 

The solid door has insulation to cut off radiated heat.

The glass is protected and does not get dirty.

The solid door hides the inside of the stove when it is not in use.

Open fire 

The Stûv 30 can also be used as an open fire.

Use this position to add more wood or to enjoy the radiated heat.

Heat comfort 

To obtain better heat comfort through uniformly distributed temperatures, please apply the following principle:
A fan (located under the stove, for example) sucks ambient air through a network of ducts in the furthest locations in the room or in neighbouring areas, avoiding picking up heavy dust on the ground. Therefore negative pressure is created and consequently the heated air is returned through carefully arranged orifices.

Powerful and efficient 

The third-generation Stûv 30-in ensures highly efficient combustion. The glass stays clean for longer and the output can easily be adjusted between 6 and 12 kW.

Ventilation

Various possibilities for the distribution of hot air and an optional fan.
The fan improves the circulation of hot air in the room and makes the temperature uniform.

Installation 

The telescopic extension piece means that the aesthetic look can be extended up to the ceiling, and is used as a ventilation solution.

The Stûv 30-in R can be installed in an alcove, without the need for ventilation grilles.

Ash container

The Stûv 30 has a built-in ash container.

Contrary to traditional wisdom, frequent ash removal is not necessary. You should leave a bed of ash in the combustion chamber to insulate the chamber and base plate from the heat of combustion.

Barbecue 

The Stûv 30-in can be fitted with a barbecue kit. The food cooks by radiated heat, without coming into contact with the flames. Juices are collected in the stainless steel tray and smells are extracted by the flue.

Floor plates

To protect your floor coverings, Stûv has defined special floor plates for this stove.
Round or oval shape, grey steel, StûvGrey.

The content of this website is intended for initial assistance only – for full details please contact the showroom or refer to the manufacturers website for each product – there you will find full technical details, the product fiche etc which gives all efficiencies, installation instructions, dimensions and so on. We are more than happy to provide these but do not have the facility on this website.  If you let us know which fires you are interested in, we can provide full details by email. If you have any questions at all please let us know.   Happy Browsing! In the showroom or by email we are quite happy to provide full technical advice about installation and suitability.